Call Us On
+91 22 42029999
Welcome to Kamsons
Acrylic Polymer Emulsions for Waterproofing, Construction Chemicals, Paint Emulsions, Bopp Tape Adhesives, Waterbased Printing Inks
TDS Kamthane K 164 PP (Aliphatic PUD)
Kamthane K-164 PP is our latest development in Water Based Polyurethane Dispersions (PUD's). This is a NMP Free, Pure Aliphatic Clear PUD for use as a Topcoat over various substrates such as Wood, Metal, Plastics, Concrete & Epoxy Floorings, etc.
Kamthane K-164 Pp Film Properties
| Film appearance | Hard, flexible & Clear | |
| pH | 7-9 | |
| König hardness (s) | 200 | |
| Gloss (60°) 85+ | 85+ | |
| Taber CS17 (mg) | 21 | |
| Resistances on wood / timber for 1 hr in direct contact on the coated film after 7 days of cure at 25 degrees. | A | B |
| Water | 4-5 | 5 |
| Coffee concentrated | 4-5 | 5 |
| Tea | 4-5 | 5 |
| Methylated spirit, 48% | 3-4 | 4-5 |
| Acetone 50% | 3-4 | 4-5 |
| Mek 50% | 3-4 | 4-5 |
| Detergent (detergent pH=2-3) | 4-5 | 5 |
| Detergent (detergent pH=10+) | 4-5 | 5 |
| Acetic acid 10% solution | 2-3 | 5 |
| Sulphuric acid 10% solution | 4-5 | 5 |
| Blue food dye | 4-5 | 5 |
| Persperation solution (synthetic sweat) | 4-5 | 5 |
| Commercial Mustard | 4-5 | 5 |
| Tomato ketchup | 4-5 | 5 |
| Caustic solution | 4-5 | 5 |
| Red wine | 4-5 | 5 |
A = immediately after removal
B = after recovery
Ratings
0 = poor
1= poor
2= average
3 = good
4= V. good
5 = Excellent
Typical properties
| Type | anionic,aliphatic dispersion |
| Appearance | Translucent clear |
| Total solids (% w/w) | 34% ±2 |
| pH (25°C) | 7.0-9.5 |
| Viscosity | 160- 450 cps |
| Volatile | 8.0% |
| Elongation at break | 200 % |
| Density of dispersion (kg/l) | 1.04 |
| Konig hardness | 210 |
| Freeze/thaw stability | stable |
Film properties
Extremely Hard & scratch free properties, but yet flexible
High clarity, Hard and flexible
Excellent water and alkali resistant
Excellent abrasion, chemical & impact resistance
Good alcohol resistance
Adhesion to many substrates
Recommendation for end-use
Very compatible with Kamsons Acrylics
Concrete & rigid substrate coatings
Industrial waterproofing coatings
Multi-surface & paint coatings
Metal, plastic & wood coatings
Parquet floorings
General guidelines
The addition of wetting and/ or levelling agents and defoamers is required.
The chemical and mechanical properties of Kamthane K-164 PP can be enhanced with small amount selected silanes & other crosslinkers.
Kamthane K-164 PP can be formulated with suitable coalescents,and matting agents.
Kamthane K -164 PP is compatible with a wide range of acrylics.
