KAMICRYL ELASTOFALT
LATEX MODIFIED WATERPROOFING MEMBRANE
ELASTOFALT (ME) is a paste waterproofing membrane based on a highly specialized polymer latex modified emulsion. ELASTOFALT (ME) is highly recommended for water proofing application for the building structure including foundation, kitchen and toilet floors, facades and roof. ELASTOFALT (ME) has excellent adhesion to dry as well as to damp and primed surfaces of concrete, plaster, masonry, bituminous roofing felt, asphalt coatings and metal. ELASTOFALT (ME) is highly resistant to chlorides and sulphates commonly present in the soil. It is also highly UV resistant.
Uses
For waterproofing of :
* New roofs.
* Balconies, terraces, parking garages, asbestos and concrete roofs.
* Industrial washrooms & shower
* Water reservoirs and swimming pools.
* Foundations, cellar walls, retaining walls, bridges abutments.
* Refurbishing of old waterproofing system including torch-on membrane.
* Facade damp proofing.
* Water proofing/Curing membrane and protective coating for sub structure.
Features
o Single component and cold applied.
o ELASTOFALT (ME) has excellent UV resistance and long term ageing stability.
o Cured membranes from ELASTOFALT (ME) remain highly flexible even at
   extremes of temperatures (-25°C to 120°C).
o Excellent vapour barrier.
o Environment friendly.
o Resistant to chlorides and sulphates commonly present in the soil.
o Compatible with cementatious tiling adhesive.
Surface Preparation
The surfaces to be applied should be clean and free from oil and grease. Loose particles should be removed and damaged spots repaired first. Cracks should be filled up.
Application
ELASTOFALT (ME) can be applied by a soft, longhaired brush or broom; Alternately
the product can be spread by a rubber squeegee. Additional layers must only be applied when the previous layers have dried.
Recommended consumption of product should be followed. For multiple coats allow
sufficient drying between coats. Wherever possible apply coats at right angles to each other to achieve even thickness of coating. ELASTOFALT (ME) also acts as a non-degradable curing membrane, hence may be applied immediately after the removal of mould, to the concrete structures, which has no aesthetic value such as the substructures of the building.
Typical product characteristics
Non-volatile content : 65% min
Rubber Content on dry film : Approx. 15%
Elongation (ASTM D 412)
Ultimate tensile strength;		 : 1000% approximately
(ASTM D 412) : 0.30 N / 2
Sp.Gr. : 1.05 +/- 0.01
pH : >9
UV and Ozone stability : Excellent
Chemical stability : Resists most common spills like oil and
Mild chemicals. Will not resist solvents
which will dissolve bitumen.
Temperature resistance  : -25/ + 120 Deg.C
Touch Dry : 1-2 hours
Coverage :
For waterproofing in wet area/roofs : I kg/sqm /coat - 2 coats recommended
For refurbishment of roofing membrane in reasonable good condition : 1 kg/sqm /coat - 1 coat recommended
For refurbishment of roofing membrane
In bad condition		 : I kg/sqm /coat - 2 coats recommended
Storage/Shelf life
Keep away from direct sunlight and store under normal warehouse conditions. The shelf life is 6 months from the date of manufacturing provided it is stored in unopened factory packed drums.
Cleaning Tools may be cleaned with water as long as the product is wet. Once dry, by mechanical
means only.
Packing
200 kg drum & 18 kg pail.
Health and Safety
Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately. As with all chemical products, caution should always be exercised.

MATERIAL SAFETY DATA SHEET ELASTOFALT ME

Important: Read this MSDS before handling and disposing of this product and pass this information on to employees, customers, and users of this product.
1. Generic / Trade Name : ELASTOFALT ME
2. Chemical Name : Latex Modified Bituminous paste membrane
3. Supplier : KAMSONS CHEMICALS PVT. LTD. Plot No. A-726, T.T.C., MIDC, Mahape, Navi Mumbai. Ph : 022-27780767, 022-27780768. Fax : 022-26854438
4.Composition : Paste based latex modified bitumen emulsion
5. Hazardous Ingredients : Nil
6. Appearance and Colour : Black thixotropic emulsion
7. Usage : Waterproofing paste membrane
8. Physical Properties :
    Density Kg/M'
    Boiling Point (°C)
 Viscosity at 20°C
    Flash Point   (°C)
    Auto ignition temp
    Flammability Limits
    Other
    Solubility in Water (Kg/CuM)
    pH
    Particle size (Micron)
1.05+/-0.01
Boiling Point (°C)
2000 - 2500cps
NA
NA
NA
-
Miscible
>9
4.0 - 5.0
9. Important Characteristics None
10.Safety Hazards None
11. Precautions None
12. Fire Extinguishing agents      Foam / COz extinguishers
13.Fire fighting precautions -
14. Health Hazards
      Inhalation
      Skin
      Eyes
      Ingestion		 May cause dizziness on prolonged inhalation
On prolonged contact cause irritation.
Cause irritation
Seek immediate medical attention
15. First Aid : In case of skin contact, flush with plenty of water. In case of eye contact, or accidental swallowing, flush with plenty of water and seek medical advice immediately.
16. Personal protection
      Normal Usage.
      Spill Control/clean up.          

Besides using apron and Safety shoes always use safety goggles and rubber gloves while handling the product Spill clean up by washing with water
17.Environmental Hazards None
18. Precautions  As above keep away from children
19. Spillage Mitigation see also 15  Spillage can be collected in a container and wash surface with soap and water
20. Disposal options Collect all spillage in a container and wash surface with water.
21. Storage/Shelf life/Date of
      Manufacturing/batch No:    
      Printed on the drum

Store in cool dry place, protected against heat / sun. The shelf life of this product is one year from the date of manufacturing

provided  the  material  is  stored  in unopened  factory  packing.

22. Packaging & Labelling 200 Kg Drum & 18 kg Pail
23. Supplementary Info CAS NO: 8052-42-4 FOR ASPHALT BITUMEN

DISCLAIMER OF LIABILITY
1. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information will not be applicable, & company will not be responsible in any manner for the damages, if occurred, due to other external factors.
 
2. The information in this MSDS was obtained from sources, which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness.
 
3. The conditions or methods of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge, for this and other reasons, we do no assume responsibility and expressly disclaim liability for loss, damage or expense rising out of or in any way connected with the handling, storage, use of disposal of the product.
 


 

Designed & Hosted by : MID   Promoted by : GID